WUTA WT818 Mini Card Case Pattern
Pattern for a mini card case
Brand: WUTA
WT818 card case pattern with 3 card slots and 1 small bill compartment.
Features
- Finished size 105×82 mm / 4.1×3.2 in; approximately 1.2 square feet of leather is required. Only the pattern is sold, not a finished card case.
- A PDF pattern downloaded after payment; printed on A4 paper. The source states it is for personal learning use only, with commercial use and redistribution prohibited; design changes are required before selling. PDF patterns are non-refundable.
- The text also mentions a clear acrylic template aiding cutting; the PDF and acrylic descriptions are mixed together on the same page.
- The image shows 5 kraft paper pieces; this is a separate source inconsistency from the PDF and acrylic formats mentioned in the text.
- Visible pattern labels: back piece ×1, front main piece ×1, front upper piece ×2, front lower piece ×1; 1.2 mm leather for each. The front reference pattern should not be cut. Three sides of the front main and upper pieces are skived.
Specifications
| Product group | Leathercraft templates |
|---|
| Format | The text mentions PDF/A4 and an acrylic template |
|---|
| Finished size | 105×82 mm |
|---|
| Leather requirement | Approximately 1.2 square feet |
|---|
| Leather thickness (per diagram) | 1.2 mm |
|---|
| Template composition (per diagram) | 5 kraft paper pieces; one for reference only |
|---|
| Manufacturer's product name | WT818 Mini Card Case Pattern | WUTA |
|---|