WUTA SPC Round Hole Punch
0.5–30 mm round hole punch
Brand: WUTA
Special imported alloy-steel tool of the Korean SPC brand, manufactured in China.
Features
- The title gives a 0.5–30 mm range; 1 tool per selected option in the package. Laser machining, high-temperature treatment, a thin sharp-polished edge, and a wide chip-clearing channel.
- For thick material and long-term leatherwork, poultry/hunting gear, models, craftwork, and household repairs.
- Wipe dry after use, coat with a rust-preventive oil, and store in a dry place away from children. Minor rust and cutting marks are possible on steel shipped with an oil coating.
- In individual cards, hole diameter → tool length×width: for 0.5/0.7/1.5/2/2.5/3/3.5/4 mm, 100×7 mm; the 1 mm card states 199×7 mm, while the general diagram gives a length of 99 mm.
- The 5 mm card shows 105×10 mm; 7 mm, 108×13; 8 mm, 111×13; 9/10/11 mm, 120×16; 12/13/14 mm, 122×20; 15/16 mm, 122×22; 17/18 mm, 129×25; 19/20 mm, 129×28 mm.
- The 21/22 mm cards give 133×30; 23/24 mm, 133×32; 25/26 mm, 133×35; 27/28 mm, 138×38; 29 mm, 139×38; 30 mm, 139×40 mm length×width.
- The general diagram for the 6 mm tool shows a length of 105 mm; the matching individual card labels the diameter of the 105×10 mm tool as 0.6 mm. This tenfold labeling discrepancy is not corrected without confirmation.
- Differing lengths in the general diagram: 101 mm for 0.7 mm; 99 mm for 1.5 mm; 119 mm for 10 mm; 124 mm for 12 and 15 mm. In the individual cards these are 100/100/120/122/122 mm respectively.
- The three-piece set is 1+3+5 mm. There are two different six-piece set images: 1/1.5/2/3/4/5 mm, and 1/1.5/2/2.5/3.5/4 mm. The ten-piece set is 0.5/1/1.5/2/2.5/3/3.5/4/4.5/5 mm.
- Two different 15-piece sets are shown: the old one, 0.5/0.7/1/1.5/2/2.5/3/3.5/4/5/6/7/8/9/10 mm; the new one, 0.5/1/1.5/2/2.5/3/3.5/4/4.5/5/6/8/10/12/15 mm. The same piece count does not mean all packages have the same contents.
- A separate white rubber cutting pad is shown as 12×8 cm. The yellow storage box is not included in the order. The image presents SPC as a Korean brand, manufactured in China.
- The wide side channel makes it easier for cut pieces to clear; the body has a size marking and logo. A punching example on soft sheet material is shown alongside leather. In one place the material is called alloy tool steel, and in the rust-prevention note it is called carbon steel.
Specifications
| Product group | Punching tools |
|---|
| Material | Special imported alloy tool steel |
|---|
| Included in the kit | 1 hole punch |
|---|
| Assortment | 0,5–30 mm; further refined within the options |
|---|
| Separate base | White rubber 12×8 cm |
|---|
| Place of manufacture, per diagram | China; presented in the photo as an SPC Korean brand |
|---|
| Sets (per diagram) | 3 / 6 / 10 / 15 tools; the 6- and 15-piece sets differ in composition per the photos |
|---|
| Manufacturer's product name | SPC Round Hole Punch Alloy Tool Steel 0.5-30mm | WUTA |
|---|