WUTA Manual Hand Press

Name: WUTA Manual Hand Press
Brand: WUTA

Press for setting snaps, rivets, and eyelets

Brand: WUTA

Aluminum alloy/steel hand press with interchangeable dies; for setting snaps, rivets, and metal eyelets with the matching die.

WUTA Manual Hand Press Tool for Snap Buttons, Rivets & Eyelets Installation Tool

Features

The press weighs 1335 g; the selected die weighs 70–180 g. Designed to reduce hand effort and work quietly; for tailors, craftsmen, badge workshops and manufacturing.
Also used with small stamping dies: a firm support must be underneath, and the support height must be adjusted to suit the job.
Snap Button dies: 666#—8 mm; 665#—10 mm; 633#—12.5 mm; 831#—15 mm. Each die set has 4 parts. Snap Fastener dies: 205#—10 mm; 203#—12.5 mm; 201#—15 mm, 4 parts each.
Eyelet dies: 26#—12 mm inner diameter; 24#—10 mm; 22#—8 mm; 20#—6 mm; 2#—5 mm; 8#—2.5 mm. Each set has 2 parts.
Standard rivet dies 3/4/5/6/7/8/9/10 mm; mushroom-head rivet dies 4/5/6/7/8/10 mm. Each set has 2 parts; the matching hardware size equals the die size.
The matching die size allows universal use; different post lengths are chosen to match material thickness. The source requires the material, snap and die thickness to match up.
Minor scratches and oil marks don't impair function. A 0.5–2 cm hand-measurement variance is possible.
The press's pictured dimensions: arm 29 cm; overall height 39.5 cm; base 17.8 × 9.2 cm; open working height 9.2 cm. The upper die socket is for an M8 screw with a 7.8 mm screw diameter; the lower die hole is 19 mm. The image describes the press material as aluminum+iron, and the die as carbon steel+brass.
The press and die are separate selections. The base is shown secured to a table with 3 fastening screws. Adjust the inter-die height with the screw, keeping the arm's motion intact, to prevent over-clamping and snap crushing. The dies are made to the dimensions of WUTA brass hardware; some European standards and brands with different sizes may not be compatible.
Pictured 633 assembly: seat the lower die in place, fasten the upper die with the screw; place the cap and punched leather onto the lower die, place the female part on top, and press. Then position the counterpart die pair, place the long-post cap underneath, the leather and the male part on top, and press until fully joined.
Some kit images list an open-gold 12.5 mm snap—10 pairs; a gun-black 12.5 mm fastener—10 pairs; a copper 6 mm rivet—10 pairs; a nickel 6 mm capped rivet—10 pairs; a washered copper 11 mm eyelet—4 pairs. Another general image states the hardware is only a display sample and is not included; without confirming the selection's contents, these samples aren't considered a universal kit.
The pictured die families also show a 12 mm option for standard rivets and a 12 mm option for capped rivets; the main text's lists end at 10 mm. All actually available order variants are kept separately.
Sample hardware dimensions from the images: for the 12.5 mm-labeled snap, separately 5.9×2.5 and 5.5×3 mm; for the gun-black 12.5 mm sample, 5 mm width and 3 mm height; for the 6 mm copper rivet, the cap and post are each 6 mm; the nickel capped rivet 6 mm. These sub-dimensions aren't identified with the nominal size in the heading.
For the 11 mm eyelet sample, the outer/inner diameter is 11/6 mm and the height 5 mm; the same image mistakenly gives their inch equivalents as 4.3/2.4/2. The metric marks and the conversion conflict remain.

Specifications

Product group	Installation tools
Material	Aluminum alloy and steel
Press size (per diagram)	Height 395 mm; base 178 × 92 mm; arm 290 mm; working space 92 mm
Mold connection (per diagram)	Upper M8 / 7,8 mm; lower socket 19 mm
Mold 201 (per diagram)	Four parts, diameter × height: 22×25; 13×35; 22×30; 14×35 mm
Mold 203 (per diagram)	Four parts, diameter × height: 22×24; 12×35; 23×30; 12×35 mm
Mold 205 (per diagram)	Four parts, diameter × height: 22×24; 12×35; 22×28; 12×35 mm
Mold 666 (per diagram)	Four parts, diameter × height: 22×23; 12×35; 23×30; 12×35 mm
Mold 633 (per diagram)	Four parts, diameter × height: 22×26; 19×35; 24×30; 12×37 mm
Mold 665 (per diagram)	Four parts, diameter × height: 22×23; 12×35; 23×30; 12×34 mm
Mold 831 (per diagram)	Four parts, diameter × height: 22×25; 11×33; 22×30; 12×35 mm
Standard rivet bottom die (per diagram)	3/4/5/6/7/8/10/12 mm options: top diameter 16, base 19, height 21 mm. 9 mm option: top 18, base 21, height 23 mm.
Standard rivet top die (per diagram)	Nominal size: body diameter × height / screw diameter (mm): 3:9×31/5; 4:9×31/5; 5:9×32/5; 6:9×32/5; 7:9×32/5; 8:10×32/5; 9:14×35/9; 10:12×32/5; 12:14×32/5.
Capped rivet bottom die (per diagram)	4/5/6/7/8/10 mm options: top diameter 16, base 19, height 21 mm. 12 mm: top 16, base 19, height 22 mm.
Capped rivet top die (per diagram)	Nominal size: diameter × height (mm): 4:9×31; 5:9×33; 6:9×31; 7:9×31; 8:9×32; 10:10×32; 12:14×32. Screw diameter 5 mm in all.
Eyelet molds (per diagram)	8#, 22#, 2#, 20#: bottom diameter 22 × height 30 mm. Top height 35 mm; 8# diameter 12 mm, the other three 13 mm.
Manufacturer's product name	WUTA Manual Hand Press Tool for Snap Buttons, Rivets & Eyelets Installation Tool