WUTA Manual Leather Splitting and Skiving Machine

Name: WUTA Manual Leather Splitting and Skiving Machine
Brand: WUTA

Manual leather skiving machine

Brand: WUTA

Hand skiver made of martensitic and 304 stainless steel; available in narrow and wide-width options with adjustable cutting thickness.

WUTA Leather Splitter Machine, Manual Leather Skiving Tool for Precise Leather Thinning and Splitting

Features

Small model width 8.5 cm / 3.34 in; large model ≤18 cm / 7.08 in. Recommended output thickness 0.5–4 mm; suitable input material is given as firm leather 1.2–5 mm thick.
Round sturdy rubber handle, dual-bearing 304 stainless steel roller, textured adjustment screw and blade positioner. Thickness is adjusted by turning the screw; the source claims precision within 0.1 mm.
Blackening/anti-rust treatment and laser logo. The general product text states 20 sharp blades and 2 G-clamps; this count matches the large model's photo, while the small model has a separate, different kit. The older text also mentions holding by hand, but the pictured warning requires mounting to a stable, heavy table. A retaining screw is removed to change the blade.
Actual width depends on leather quality, user skill and working technique. Since sharpness depends on the blade, regular replacement or a higher-quality blade is recommended.
Thinning below 1.0 mm requires a very sharp new blade; this threshold is not recommended for soft/elastic leather. Before use, wipe the roller and test on scrap leather to avoid surface staining.
The manufacturer requires mounting to a stable, large worktable weighing at least 50 kg using screws or a G-clamp. Strong pulling can tip over a light/small table; without a stable table, conditions are not suitable for use. Leather scraps are cleaned from the blade and roller; cut-resistant gloves and tweezers are shown when working with the blade.
Although the small model's width is 8.5 cm, the image doesn't recommend the wider portion beyond 5 cm / 2 in for beginners or soft leather. Another warning states soft/highly elastic leather is not suitable; this material limitation remains in effect.
The pictured thickness recommendation shows output of 1.2 mm and above. Below 1.0 mm requires a very sharp new blade; this threshold is not suitable for soft/elastic leather. The 0.5–4 mm advertised range in the product text is a separate source indication.
When the handle is pressed, the roller separates from the blade; the leather is placed with the back/grain side up and pulled with even force. Separate screws adjust spring tension and thinning thickness; the base has four mounting holes.
Blade compatibility is listed as the standard 18#-L, 18 mm / 0.71 in wide; length differences for the small and large models are separated in the table. Packages may randomly ship in either the older plain box version or the new logoed box version.
The large machine's kit photo additionally shows 6 mounting screws of 25 mm / 0.98 in; the general text doesn't count these separately. The name Set B is used on both the large machine card and the spare blade cards; the full variant name is decisive at order time.

Specifications

Product group	Cutting tools
Material	Martensitic stainless steel + 304 stainless steel
Working width	Small 8.5 cm / 3.34 inch; large ≤18 cm / 7.08 inch
Thinned thickness	Text: 0.5–4 mm; image recommendation ≥1.2 mm, for <1 mm use a new, very sharp blade
Infeed apron	1.2–5 mm thick firm leather
Kit	Small Set A: 1 machine + 10 blades + 1 G-clamp + 2 wrenches; large Set B: 1 machine + 20 blades + 2 G-clamps + 2 wrenches; separate blade packs also available
Work-table requirement	Stable, large, at least 50 kg; secured with a screw/G-clamp
Manufacturer's product name	WUTA Leather Splitter Machine, Manual Leather Skiving Tool for Precise Leather Thinning and Splitting