PONY 403
Garment finishing system
Brand: PONY
A microprocessor-controlled dummy for finishing shirts, jackets and other outerwear. It works with a pneumatically closing front clamp and a steam-heated counter-clamp. The skirt trolley and collar attachment are positioned manually; the side clamps close pneumatically.
Features
- Pneumatic sleeve clamps
- Manual hem height and side position adjustment
- Options: built-in boiler, sprayer, iron and oval sleeve shapes
- Side clamp position is selected manually; rear clamps and collar lock are also manually controlled.
- In addition to microprocessor cycles, a manual cycle can also be run.
- The optional oval-shaped sleeve holders provide pneumatic sleeve tensioning; a water sprayer is supplied with a stand.
- AF LOGIC control switches with one button between SHIRT (shirt/robe), WET (wet-cleaned outerwear) and DRY (dry-cleaned outerwear) modes.
- Standard elastic soft clamps are designed to reduce shine, pressure marks and button impressions; there are two interchangeable front clamps and a cycle-extension button.
- The brochure shows applications for laundries, dry cleaners, hotels and care homes.
Specifications
| Power supply | 400 V/3+N/50 Hz |
|---|
| Blowing motor | Blower motor: 1,5 kW |
|---|
| Steam inlet and condensate outlet | Without boiler: each 1/2 inch |
|---|
| Steam pressure | Without boiler 4–6 bar; with boiler 4,8 bar |
|---|
| Steam consumption | Without boiler 25–30 kg/hour |
|---|
| Boiler heater | Boiler heater: 8 kW |
|---|
| Boiler steam output | Boiler steam output: 11 kg/hour |
|---|
| Boiler pump motor | Boiler pump motor: 0,5 kW |
|---|
| Water inlet and boiler drain | 13 mm rubber hose; 1/2 inch drain |
|---|
| Air inlet | 1/4 inch |
|---|
| Air pressure | 6–8 bar |
|---|
| Air consumption | 9 Nl/cycle |
|---|
| Operating footprint | Maximum 1500 × 2500 mm |
|---|
| Net / gross weight | Without boiler 290/320 kg; with boiler 320/350 kg |
|---|
| Packaging dimensions | 1620 × 820 × 2050 mm |
|---|
| Packaging volume | 2,70 m³ |
|---|
Documents