LeTech Leather Fluor Colourant
Coloring agent
Brand: LeTech
Leather Fluor Colourant / Leather Fluorescent Colourant is a water-based polyurethane fluorescent dye using Vibrant Plus+ technology.
Features
- A high-gloss concentrated pigment intended for a complete colour change over several coats, restoring vivid bag/accessory colours, and custom design.
- Suitable for genuine and synthetic leather in car interiors, furniture, footwear, clothing, bags and accessories; not suitable for suede/nubuck.
- The flexible coating is designed for resistance to water, UV, weather, abrasion and other mechanical loads, while preserving softness.
- Test each product on a small, inconspicuous area before full application.
- Clean the surface with Leather Ultimate Cleaner; remove heavy grease stains first with Leather Degreaser. Then degrease with Leather Alcohol Cleaner or Leather Liquid Degreaser.
- Remove damaged, poorly adhering old coating with Solvent Cleaner or Leather Prep; apply Leather Primer as a base coat, adding 5–10% Cross Linker X by total volume.
- Shake and mix the dye and pass it through a 190-micron filter; spray thin coats with compressed air free of water and oil. For the dye, a 0.5–1.2 mm nozzle is recommended, with pressure of 1.1–8 bar depending on the equipment; thinning with distilled water is permitted.
- For small local touch-ups, base coats and colour restoration, the dye can also be applied with a sponge, brush or roller.
- For artwork and thicker application, viscosity can be increased with Thickening Agent.
- For final protection, add 5–10% Cross Linker X by total volume to the Leather Top Coat.
- Compatible additives: Leather Slip Additive, Leather Non-Slip/Wax-Effect Additive, Leather X-GUARD Additive, Leather Casein Additive and Leather Thickening Agent.
- Apply the final coat thinly and evenly with an airbrush/spray gun after repair and dyeing; a thick coat may change the colour and stiffen the leather.
- Drying time depends on temperature and humidity: careful use is possible after 2–3 hours, full cure takes 8–12 hours. Do not apply cleaning or care products during the first week.
- Clean tools with water, using Leather Prep if necessary.
- The colour can be either refreshed or completely changed; an exact match is achieved through mixing/colour matching. On synthetic leather and vinyl, the product instructions must be followed precisely.
Specifications
| Application area | Aviation · Automotive · Watercraft · Handmade goods · Furniture · Footwear · Bags and leather accessories |
|---|
| Material type | Aniline leather · Vinyl and plastic · Waxed leather · Synthetic leather · Vegetable-tanned leather · Pigmented leather · Semi-aniline leather |
|---|
| Manufacturer's product name | Leather Fluor Colourant — Fluorescent Leather Paint |
|---|