KREUSSLER Hydrob EASYDRY

Name: KREUSSLER Hydrob EASYDRY
Brand: KREUSSLER

Stain remover

HYDROB EASYDRY water- and oil-repellent finishing agent for use at low drying temperatures.

Hydrob EASYDRY

Features

PFOA/PFOS-free; a coating resistant to mechanical/chemical stress without changing breathability and water-vapor permeability. For initial/renewed proofing of sports, rain, rescue/fire and industrial protective garments.
Use at least a 70% load, avoid overloading, and process similar fabrics together; do not process cotton in the same load as synthetic/blended fiber. Follow the care label.
Spraying is possible on large clean surfaces such as tents, sails and covers; do not inhale the aerosol, and test consumption beforehand. The effect can increase over time.

Type of Goods	ml/l (ml/kg) · °C
Outer Clothing, Sport and Rain Clothing	5-10 (20-40) · 40-60
Fire Brigade Clothing, Chemical Protection	15-25 (60-100) · 60-80
Standard Packagings	Dispatch unit / pallet
10 kg Plastic Canister	80
24 kg Plastic Canister	36
40 kg Plastic Canister	16
200 kg Plastic Drum	2
Activation	Textile at 40°C; drip/water pressure and, per the source, DIN 32763 type IV chemical protection ≥60°C
Bath	Ratio 1:3–1:4; 30–40°C; 5–7 min.; separate dosage note 1:3–1:6
Extraction	2 min.; 1 min. pressing on membrane → 1 min. cycle → 1 min. pressing
Drying measurement	At least 60°C/5 min. on the drum thermometer; if 80°C is required, ≥7 min.
Outerwear/sportswear/rainwear	5–10 ml/l (20–40 ml/kg), 40–60°C
Fire/chemical protective clothing	Initial coating 15–25 ml/l (60–100 ml/kg), 60–80°C; renewal approx. ¼ dose, depending on the process
Spraying	Approx. 100 ml/m² of 50% solution; air-dry with 30–40°C warm air
Storage	24 months from delivery; +5…+30°C; after prolonged frost, warm to 20°C and mix, close tightly.
Packaging / pallet	10 kg / 80; 24 kg / 36; 40 kg / 16; 200 kg drum / 2