EVOCLEAN EvoClean E126

Name: EVOCLEAN EvoClean E126
Brand: EVOCLEAN

Venturi-principle laundry dispenser — 6 products

EvoClean E126 is a water-driven professional laundry dispenser made by Hydro Systems (USA), for 6 chemical products. The chemical is not drawn by a pump but by the vacuum created by water passing through an eductor, and is delivered to the washer via an integrated manifold. Supplied with Total Eclipse controllers and a machine interface (TEM models) or without them; there are two chemical flow-rate options — low (550 ml/min) and high (1500 ml/min). Suitable for commercial laundries running programs with more products.

EvoClean E126 — 1 EvoClean E126 — 2

Features

Venturi (eductor) principle: no pump, electric motor or squeeze tube — the chemical is drawn in by the vacuum created by flowing water. Unlike peristaltic pump systems, no tube replacement is required.
An integrated flush manifold and compact housing reduce installation time, spare parts and service labor.
Since there is no squeeze tube wear, dosing performance does not decline over time; the unit is calibrated only once.
According to the manufacturer, it is 50% lighter than conventional peristaltic pumps and takes up less space in the room.
The eductor limits water flow to 0.5 or 1.0 GPM (depending on the model) and runs no electric motor — saving water and energy.
Total Eclipse controller: 20-formula memory, Automatic Formula Selection, a large LCD screen with formula names and fault diagnostics, low-voltage "plug-and-play" connection; password-protected programming; product consumption, cost per formula and an activity log are exported to USB as an HTML report (opens in Excel).
Can be added to existing Total Eclipse controllers by loading new firmware.
Check valves: gray (EPDM) is used only for alkaline products, blue (Viton) for other chemicals.
For commercial laundry use only; not suitable for domestic use.

Specifications

Number of chemical products	6
Chemical flow (low / high flow model)	550 ml/min (18,6 oz/min) / 1500 ml/min (50,7 oz/min)
Water flow (eductor)	0,5 or 1,0 GPM (≈ 1,9 / 3,8 l/min), depending on model
Working water pressure	1,5–6 bar (25–90 PSI)
Inlet water temperature	5–60 °C (40–140 °F)
Chemical temperature	room temperature
Power supply	110–240 V AC, 50–60 Hz, up to 0,8 A
Water inlet	3/4″ garden hose connection (G); BSP and John Guest variants also available
Outlet fitting	1/2″
Non-return valve fitting	3/8″
Control	Total Eclipse controller (20 formulas) + machine interface — included on TEM models
Housing material	front ASA, back PP-TF
Operating environment	10–50 °C, relative humidity ≤ 95%
Compatibility	UL 60730-1 / CSA E60730-1; CE (2014/35/EU, 2014/30/EU); IEC 60730-1
Dimensions (W × H × D)	360 × 220 × 162 mm