DOMUS CM-1420 M, 1620 M, 2020 M Ø200 MM
Wall-mounted roller ironing system
Brand: DOMUS
DOMUS CM-1420 M, CM-1620 M and CM-2020 M are wall-mounted calenders with a Ø200 mm roller that dry and iron textiles in one operation after a high-spin washer-extractor; working width is 1,400–2,000 mm. The M electronic control's automatic mode matches speed to the selected temperature; the roller is inverter-driven, and the belts are Nomex. Heating is electric, with automatic stop at 80 °C at the end of cooling.
Features
- The M electronic control regulates speed, temperature, and automatic shutoff; the shutoff temperature at the end of cooling is 80 °C and is adjustable. There is an inverter-driven polished steel roller, Nomex feed/ironing belts, wound felt, and skinplate/stainless steel panels.
- Textiles are dried and ironed in a single operation after a high-extraction washer. Front input and front output, a 990 mm feed height, a built-in cooling mode; service access from both sides, and electrical and air/steam exhaust connections. CE certification is stated.
- Electric heating. Options: 440 V III 60 Hz without-neutral and 230 V III 50/60 Hz voltages, and wooden packaging for sea transport.
Specifications
| Shaft diameter | 200 mm |
|---|
| Working width | 1 400 / 1 600 / 2 000 mm |
|---|
| Speed | 1,5–6 m/min |
|---|
| Heating | Electric |
|---|
| Heater power (electric) | 10,5 / 12 / 18 kW |
|---|
| Output (electric) | 12 / 16 / 22 kg/hour |
|---|
| Loading height | 990 mm |
|---|
| Control | M electronic control |
|---|
| Automatic stop | 80 °C (adjustable) |
|---|
| Noise level | <60 dB |
|---|
Documents