COLOURLOCK Fluid Leather — 20 ml

Name: COLOURLOCK Fluid Leather — 20 ml
Brand: COLOURLOCK

Colored elastic filler for leather and imitation leather

A colored repair compound that fills and bonds small holes, deep scratches, tears, and cracks, staying soft and elastic once dry.

Fluid Leather 20 ml Liquid leather

Features

Formerly named Flüssigleder; the color is chosen through customization. For a car, get the exact color name — not just the color code — from the dealer using the VIN; the model/year alone is not enough to determine the color.
The furniture color may be shown on the purchase invoice; if not, it is recommended to submit a sample to the manufacturer.
Test all products first on a small, inconspicuous area.
Before dyeing, the surface must be dry, clean, and free of grease. Clean the intact colored area with Leather Cleaner; use a soft brush for dirt in the texture and a slightly damp cloth for residue.
In the repair area, especially where it contacts the skin, remove oil and previous care product residue with Degreaser. The source gives adhesive tape being difficult to peel off as a check for proper degreasing.
Smooth rough wear with the Sanding Pad without pressure; remove the dust with a cloth dampened with Degreaser.
Fill with Fluid Leather and smooth it immediately with the spatula. Drying takes 1–2 hours depending on the amount and room temperature; since shrinkage occurs, repeat the coats until the level is even.
Soften and smooth an uneven repair with a little GLD-Solvent Pen and light pressure; the Sanding Pad can also be used once softened. Excess GLD can spread the repair, so let it dry again in between. A fully invisible result is not promised.
Remove and turn the felt tip of the GLD pen when it becomes dirty or worn; also do this when changing color.
Fluid Leather is glossy; a final dyeing with Leather Fresh is required to match the color and sheen. Shake Fresh and apply it with a sponge using a circular/dabbing motion rather than directly, working larger areas seam-to-seam.
For opaque coverage, apply numerous thin coats, drying each with a hairdryer that is not too hot; unevenness can be corrected with the Sanding Pad and re-dyeing. Once dry, Fresh does not transfer color onto clothing.
Wait 1 day after dyeing before applying care products; Fresh must not come into contact with liquid before it is fully dry. Leather Care provides softness/color/aging protection through conditioning, UV filters, and antioxidants, while Leather Shield protects light leather against color transfer.
Spread a small amount of the care product on a cloth and apply seam-to-seam with soft, circular motions without hard rubbing; remove excess with a slightly damp cloth. Regular, sparing cleaning and care are recommended.
Offered in 46 standard colors as well as special and custom colors.
Color selection consists of the categories: standard color, the car/furniture manufacturer's color, and a custom mix matched to a submitted sample. A leather sample is not required when a standard or manufacturer color is chosen.
RAL colors can also be selected; sending a sample is not required for a RAL selection. The search can be done by color name, code, or car/furniture manufacturer name.
The manufacturer's 46-color standard color card can be ordered free of charge. The exact furniture color name can be found on the purchase invoice, and the car color can be obtained from the dealer using the VIN. If the color cannot be found, a custom sample can be sent in.
Sample options: a leather piece at least 1 × 1 cm, a headrest, an upholstery panel, a cushion/cushion cover, a handbag, a bellows, or another sample.

Specifications

Article number	571-999
Volume / weight	20 ml
Manufacturer's product name	COLOURLOCK Fluid Leather 20 ml liquid leather