COLOURLOCK Leather Fresh Colour & Protect Set
Leather color restoration and care set
Brand: COLOURLOCK
A cleaning, dyeing, and care kit that corrects scratches, rub marks, and color loss on surface-coated smooth leather.
Features
- 46 standard and special colors; designed not to transfer color onto clothing/textiles after application and to avoid stains or visible edge lines.
- Contents: 250 ml Leather Cleaner mild; 100 ml Leather Care; 250 ml Degreaser; 100 ml Leather Fresh; 1 Foamer Bottle; 2 Viscose Cloth; 1 Cleaning & Application Sponge medium; 2 nitrile gloves; 1 Sanding Pad; 1 synthetic Leatherbrush; instructions.
- Test all products first on a small, inconspicuous area.
- Wear suitable protective gloves at every stage.
- Pour all of the Leather Cleaner mild into the empty Foamer Bottle. Apply the foam to the sponge, not directly onto the leather. Clean seam-to-seam, remove dirt/cleaner residue with the slightly damp cloth from the kit, and dry completely; repeat if necessary.
- Remove dirt from within the texture with the leather brush. Smooth rough areas with the Sanding Pad and remove the sanding dust with a cloth dampened with Degreaser, then let it air out.
- Apply a few drops of Degreaser to a cloth and degrease evenly, then let it air out well again. Adhesive tape holding firmly is given by the source as a check for proper surface preparation.
- Shake Leather Fresh and apply it seam-to-seam with a sponge using a dabbing motion; do not pour it directly onto the leather. Work only the areas that need color renewal, drying each of several thin coats with a hairdryer in between. Finally, allow 24 hours to dry.
- Intended for color renewal of small areas; work carefully around contrast-colored stitching. Application to synthetic leather and plastic is also possible. Uneven color can be carefully smoothed with the sanding pad and re-dyed.
- On a surface that has dried for at least 24 hours and is clean and residue-free, spread a few drops of Leather Care on a soft cloth and apply a thin coat seam-to-seam. Do not polish; usually one coat is enough, repeating only for very dry/absorbent leather.
- Apply care every 3 months under heavy stress such as sun, heaters, and frequent use, or every 6–12 months under normal use.
- Color selection consists of the categories: standard color, the car/furniture manufacturer's color, and a custom mix matched to a submitted sample. A leather sample is not required when a standard or manufacturer color is chosen.
- RAL colors can also be selected; sending a sample is not required for a RAL selection. The search can be done by color name, code, or car/furniture manufacturer name.
- The manufacturer's 46-color standard color card can be ordered free of charge. The exact furniture color name can be found on the purchase invoice, and the car color can be obtained from the dealer using the VIN. If the color cannot be found, a custom sample can be sent in.
- Sample options: a leather piece at least 1 × 1 cm, a headrest, an upholstery panel, a cushion/cushion cover, a handbag, a bellows, or another sample.
Specifications
| Article number | 8805-999 |
|---|
| Manufacturer's product name | COLOURLOCK Leather Fresh Colour & Protect Set – Leather Colour Restorer & Care |
|---|